MIL-PRF-22885H
NATIONAL CONFERENCE of STANDARDS LABORTORIES (NCSL)
-
Calibration of Measuring and Test Equipment, Requirements for.
(Copies of these documents are available online at https://www.ncsli.org/ or from the National Conference of
th
Standards Laboratories, 1800 30 Street, Suite 305B, Boulder, Co 80301, telephone 303-440-3339.)
SAE INTERNATIONAL
Markings For Aircrew Station Displays Design and Configuration of
-
-
Circuit Breaker, Trip-Free, Push-Pull, 5 Thru 35 Ampere, Type I.
-
Circuit Breakers, Trip-Free, Aircraft, General Specification for.
-
Terminals, Lug, Splices, Conductor, Crimp Style, Copper, General Specification For
(Copies of these documents are available online at https://www.sae.org or from SAE International, 400 Commonwealth
Drive, Warrendale, Pennsylvania, 15096-0001)
UNDERWRITERS LABORATORIES, INC. (UL)
-
Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
(Copies of these documents are available online at https://www.ul.com or from the Underwriters Laboratories, Inc., 333
Pfingsten Road, Northbrook, IL 60062-2002.)
(Non-Government standards and other publications are normally available from the organizations that prepare or
distribute the documents. These documents also may be available in or through libraries or other informational
services.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications sheets), the text of this document takes precedence. Nothing in
this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Switch categories. Switches furnished under this specification shall be category I or category II as defined in
3.2.1 Category I switches. Switches shall be completely defined by a specification sheet (see 3.1). Category I
switches shall be ordered in accordance with 6.2.1.
3.2.2 Category II switches. Switches, the same as qualified category I switches, except for minor differences
which do not change the basic materials, interface and dimensions of the qualified switch and which do not effect
performance. Unless otherwise specified (see 3.1), these variations are limited to the addition of legends, variation in
size, shape, or dimensions of terminations; selected switches with tighter tolerances on illuminated color, luminance
or operating characteristics; and variations in illuminated color, display type, or color of bezels, mounting flanges,
barriers, and mounting bushings. Category II switches shall be acquired from a source listed on the applicable
Qualified Products List (QPL) for the particular similar product in category I. Category II switches shall be ordered in
accordance with 6.2.2.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business