MS39061D
Configuration B (Grade 1, Type I and II).
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
|
.015 |
.381 |
.28 |
7.112 |
.75 |
19.05 |
1.812 |
46.025 |
|
.03 |
.762 |
.40 |
10.16 |
1.28 |
32.512 |
2.15 |
54.61 |
|
.032 |
.813 |
.50 |
12.70 |
1.50 |
38.10 |
7.50 |
190.50 |
|
.06 |
1.524 |
.634 |
16.10 |
|||||
|
NOTES: |
4 |
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.030 (0.79 mm) on decimals and ±10° on angles.
4. Mounting plate shall be rigidly and firmly assembled to the switch as shown.
5. Switch shall withstand a force of 25 pounds applied .125 ±.031 inch from the end of the switch lever.
6. The lever dimensions shall be such as to allow for incorporation of the luminous shown on figure 2.
7. Contour of switch optional provided maximum dimensions specified are not exceeded.
8. All exposed switch terminals shall be encapsulated with potting material. Presence of thin traces of potting material on switch base allowed.
9. All wire leads shall be supplied with connectors in accordance with MS27142-2 or equivalent.
10. Lead wires shall be 14 AWG, M13486/1-5 in accordance with MIL-DTL-13486, color black. Each
lead wire shall be marked with numerals 1 through 3. Non-functional lead wires shall not be supplied.
11. At minimum, marking shall consist of the PIN and Manufacturers Identification in accordance with
MIL-STD-130 and lever position identification in.
FIGURE 1. Dimensions and configurations - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business