MS39061D
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.016 |
0.41 |
.40 |
10.2 |
.75 |
19.1 |
1.625 |
41.28 |
.060 |
1.52 |
.625 |
15.88 |
.875 |
22.23 |
1.813 |
46.05 |
.188 |
4.76 |
.719 |
18.26 |
.969 |
24.61 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.030 (0.79 mm) on decimals and ±.5° on angles.
4. Switch shall withstand a force of 25 pounds applied .125 ±.031 inch from the end of the switch lever. and the lever dimensions shall be such as to allow for incorporation of the luminous shown on USAF DWG 43A17587.
5. Waterproof boot for switch lever shall meet the environmental requirements of MIL-DTL-13735.
6. Contour of switch optional provided maximum dimensions specified are not exceeded.
7. Marking shall consist of the PIN and Manufacturers Identification in accordance with MIL-STD-130 and lever position identification in accordance with figure 1, configuration A.
FIGURE 1. Dimensions and configurations - continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business