MIL-PRF-8805/98E
TABLE II. Qualification group submission inspection.
Examination or test
Test sample
Other switch samples
Extent of
approval
Group 1.
Group 1.
M8805/98-33 (6 units)
1. Visual and mechanical examination
2. Operating characteristics
Visual and mechanical examination
M8805/98-15 (2 units)
3. Lever-lock mechanical endurance (4
Dielectric withstanding voltage
M8805/98-63 (4 units)
units)
Insulation resistance
M8805/98-81 (6 units)
Operating characteristics
4. Salt spray (corrosion) (2 units)
Group 2.
Group 2.
M8805/98-64 (4 units)
Strength of actuating means 1/
M8805/98-63 (4 units)
Strength of mounting bushing 1/
Thermal shock
Strength of actuating means 1/
1.
Vibration (random)
2.
Vibration
Shock (50 G)
3.
Shock (50 G)
Moisture resistance
4.
Moisture resistance
Dielectric withstanding voltage
5.
Operating characteristics
All Part or
Operating characteristics
6.
Panel seal
Identifying
Panel seal
Numbers
(PIN)
Group 3.
Group 3.
Salt spray (corrosion)
M8805/98-81 (2 units)
Group 4.
Group 4.
Low temperature operation 1/
M8805/98-81 (4 units)
Mechanical endurance at low
temperature 2/
Mechanical endurance at high
temperature 1/
Dielectric withstanding voltage
Operating characteristics
Panel seal
Group 5.
Group 5.
Electrical endurance
M8805/98-15 (2 units)
Inductive load dc
1/ Two sample units only. For low temperature operation, lever shall be held in momentary position.
2/ Same sample units as for low temperature operation.
TABLE III. Group A inspection.
Examination or test
Visual and mechanical examination
Operating characteristics
PIN: M8805/98 - (dash number from table IV).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business