MIL-PRF-8805/26J
Inches
mm
Inches
mm
Inches
mm
.030
.76
.24
6.10
.860
21.84
.038
.97
.36
9.14
.990
25.15
.060
1.52
.469
11.91
1.110
28.19
.062
1.57
.470
11.94
1.125
28.58
.072
1.82
.560
14.22
1.160
29.46
.115
2.92
.720
18.29
1.312
33.32
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm.
3. Unless otherwise stated, tolerance is ±.015 (0.38 mm).
4. Design configuration optional provided maximum dimensions are not exceeded.
5. Base switch number shall be permanently marked as shown.
6. Double turret type terminals shall accept two AN-20 wires.
7 Terminals shall be identified as "C", "NC", and "N0".
8. Alternative base metals and protective finishes, as approved by the qualifying activity, may be utilized for hexagon
nut, lock washer and key washer material. Dimensions shall be in accordance with the referenced hardware
specifications.
FIGURE 1. Dimensions and configurations -Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Enclosure design: 1 (Unsealed).
Temperature characteristic: 1 (-55° to +85°C).
Shock type: M (100G, test condition I , method 213 of MIL-STD-202).
Vibration grade: 1 (10 to 500 Hz).
Weight: See table III.
Operating characteristics:
Coincidence of operating and releasing points: All poles shall transfer within 10° of lever travel.
Material:
Bracket and lever: Corrosion resistant steel.
Switch assembly: Basic switch shall be MS25085-2 (MIL-PRF-8805/2) switch listed on QPL-8805.
Contact resistance: Not applicable.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business