MIL-PRF-8805/2K
Inches
mm
Inches
mm
Inches
mm
.001
.03
.092
2.34
.250
6.35
.002
.05
.094
2.39
.296
7.52
.010
.25
.096
2.44
.330
8.38
.015
.38
.130
3.30
.359
9.12
.020
.51
.146
3.68
.362
9.19
.058
1.47
.203
5.16
.375
9.52
.088
2.24
.234
5.94
.781
19.84
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise stated, tolerance is ±.005 (0.13 mm) for three place decimals.
4. Mounting holes shall accept .087 (2.21 mm) maximum diameter pins or screws .375 ± .002 (9.52 ± 0.05 mm)
centers.
5. Double turret type terminals shall accept two AN-20 wires and shall not extend more than .328 (8.33 mm) from the
center line of the mounting hole to the end of the terminal or .244 (6.20 mm) from the switch base to the end of the
terminal.
6. Single turret type terminals shall not extend more than .197 (5.00 mm) from the center line of the mounting hole to
the end of the terminal.
7. Solder lug terminal contour optional within maximum dimensions shown.
8. Single turret and double turret shall be cylindrical.
9. Switch contour optional provided dimensions specified are not exceeded.
FIGURE 1. Dimensions and configurations -Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business