MIL-PRF-22885/89C
TABLE VI. Qualification inspection (group submission).
Inspection table of
Extent of
MIL-PRF-22885
Part number
approval
Group
Number of samples
I
(All sample units)
4 (from group I) 1/
II
M22885/89
2 (from group I)
III
-BDW
2 (from group I) 2/
VII
1 each color 3/
VIII
All
I
(All sample units)
4 (from group I) 1/
M22885/89
II
2 (from group I) 2/
-CCW
VI
1 each color 4/
VIII
1/
Insulation resistance: Following step 6 of the final cycle of the moisture resistance
test, the insulation resistance measurement shall not be less than 5 megohms.
2/
Sea level, resistive dc load only.
3/
One style D less of each color shall be tested in any switch from group I.
4/
One style C lens of each color shall be tested in any switch from group I.
Referenced documents. In addition to MIL-PRF-22885, this document references the following:
MIL-PRF-8805/4
MIL-STD-202
MIL-DTL-6363/8
NASM35333
The margins of this specification are marked with vertical lines to indicate where modifications from this revision were
made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations.
Custodians:
Preparing activity:
Navy - EC
DLA - CC
Air Force - 85
DLA-CC
(Project 5930-2010-025)
Review activity:
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil/ .
7