INCH-POUND
MIL-DTL-9395/39D
1 March 2010
SUPERSEDING
MIL-DTL-9395/39C
30 May 2001
DETAIL SPECIFICATION SHEET
SWITCHES, PRESSURE, (GAUGE) TYPE II,
LOW LEVEL TO 5 AMPERES
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the switches described herein shall consist of this specification
and the latest issue of MIL-DTL-9395.
MIL-DTL-38999
.200 DIA THRU
.224
(2) PLACES
SAE-AS4395E05
Inches
mm
Inches
mm
.03
0.8
.55
14.0
.035
0.89
.56
14.2
.055
1.40
.750
19.05
.125
3.18
.87
22.1
.200
5.08
1.12
28.4
.224
5.69
1.135
28.83
.25
6.4
1.50
38.1
.50
12.7
2.37
60.2
NOTES:
1. Dimensions are in inches. Metric equivalents are given for general information only.
2. Exact shape of switch optional provided dimensions specified are not exceeded and mounting
holes and connector location are as specified.
2
3. Schematic shown is for switches with pressure ports exposed to zero lbf/in .
4. Unless otherwise specified, tolerances are ±.010 (0.25 mm) for three place decimals and ± .02
(.51 mm) for two place decimals.
FIGURE 1. Switches.
AMSC N/A
FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business