MIL-DTL-9395/10F
REQUIREMENTS:
Dimensions and electrical schematic: See figure 1.
Weight (maximum):
.7 lb (configuration 1).
.2 lb (configuration 2, 3, 5, 6, 7).
Proof pressure: 800 lbf/in2.
System pressure: 500 lbf/in2.
Burst pressure: 1,200 lbf/in2.
Dead band: 25 lbf/in2.
Electrical ratings:
Operating voltage - 28 V dc.
Current rating - 10 amperes inductive (configuration 1) or 2 amperes inductive (configuration 2, 3, 5, 6, 7).
5 amperes lamp load (configuration 1).
10 amperes resistive (configuration 1).
Seal:
Electrical chamber: Watertight.
Pressure chamber: Watertight.
Reference chamber: Watertight.
Electrical connector, electrical connector mating, and key location: See figure 1.
Pressure port: See figure 1.
Media: Oil IAW MIL-PRF-7808.
High temperature (operating): B (+275°F) for configuration 1; or C (+350°F) for configuration 2, 3, 5, 6, 7.
Low temperature (operating and nonoperating): D (-65°F).
Altitude: D (100,000 feet).
Shock: A (50 G).
Vibration: S (test condition D, method 204 of MIL-STD-202, except 10 - 2000 Hz, 40 G).
Life (mechanical): A (100,000 cycles).
Life (electrical): C (50,000 cycles).
Acceleration: C (8 G) for configuration 1; or D (12 G) for configuration 2, 3, 5, 6, 7.
Pulsation amplitude: E (10 percent) for configuration 1; or 50 percent of system pressure for configuration 2,
3, 5, 6, 7.
Pulsation frequency: C (200 ±20 Hz) for configuration 1; or D (500 ±50 Hz) for configuration 2, 3, 5, 6, 7.
Pulsation rise: E (250,000 lbf/in2/sec) for configuration 1 or G (1,000,000 lbf/in2/sec for configuration 2, 3, 5,
6, 7.
Connector torque: Applicable (15 ft lb - both directions).
QUALIFICATION:
Single submission: Restricted to switch submitted.
Group submission: See table IV.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business