MIL-DTL-15743E
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
- Standard Specification for Brass Plate, Sheet, Strip and Rolled Bar.
- Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled
Bar.
-
Standard Specification for Zinc on Iron and Steel, Electrodeposited
Coatings of.
(Application for copies can be found online at https://www.astm.org/ or should be addressed to the
American Society for Testing and Materials, 100 Barr Harbor Drive, P.O.Box C700, West Conshohocken,
PA, 19428-2959).
IPC - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES
-
Soldering Fluxes Requirements for.
-
Electronic Grade Solder Alloys and Fluxed and Non-fluxed Solid Solders for
Electronic Soldering Applications Requirements for.
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
-
Silicone Compound, NATO Code Number S-736
-
Packing, Performed, Hydraulic, +275 DEG. F. ("O"-Ring)
(Application for copies can be found online at https://www.sae.org or should be addressed to the Society
Of Automotive Engineers (SAE) World Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-
0001)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein except for related specification sheets, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see
3.3 Material. Material shall be as specified herein. However, when a definite material is not specified, a
material shall be used which will enable the switches to meet the performance requirements of this
specification. Acceptance or approval of any constituent material shall not be construed as a guaranty of
the acceptance of the finished product.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business