MIL-DTL-15743E
-
Enclosures for Electrical Fittings and Fixtures, General Specification for.
-
Insulation, Plastics, Laminated, Thermosetting, General Specification for
-
Insulation, Plastics, Laminated, Thermosetting, Glass-Cloth, Melamine-
Resin
(See Supplement 1 for list of applicable specification sheets.)
DEPARTMENT OF DEFENSE STANDARDS
-
Definitions of and Basic Requirements for Enclosures for Electrical and
Electronic Equipment.
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II - Internally Excited).
-
Test Methods for Electronic and Electrical Component Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://www.assist.daps.dla.mil/ or form the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D Philadelphia, PA 19111-5094.)
2.2.2 Other Government drawings. The following other Government drawings form a part of this
specification to the extent specified herein. Unless otherwise specified, the issues are those cited in the
solicitation.
DRAWING
NAVAL SEA SYSTEMS COMMAND
NAVSHIP - 9000-S6202-73055 - Fabricated Terminals (Closed end) and Branch Buses for
Electrical Fittings.
(Copies may be obtained from Commander, Naval Sea Systems Command, SEA 03R42, 2531
Jefferson Davis Highway, Arlington, VA 22242-5160.
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
-
Surface Texture ( Surface Roughness, Waviness, and Lay).
(Application for copies can be found online at https://www.ansi.org/ or 25 West 43rd Street, New York,
NY 10036-8002, telephone 212-642-4900, fax 212-302-1286)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business