MIL-DTL-15743/17B
REQUIREMENTS
SYMBOL NUMBER: See table I.
DESIGN:
Electrical rating: 125 V ac, 0-10 ampere, 60 Hz.
Dimensions and configuration: See figures 1 through 10.
Wiring diagram: See figure 9.
Mounting dimensions: See figure 8.
Degree of enclosure: Submersible (15 feet).
Weight: 4 pounds maximum.
Designation and marking: See figure 10.
Unless otherwise specified in the ordering data, switch action and identification marking shall be as
shown on figure 11. Switch function marking shall be as shown in table III.
Parts: The parts shown in table II and as specified in MIL-DTL-15743 shall be used in the
construction of the switch specified herein. Parts selection for applicable switch function is
given in table III.
GENERAL INFORMATION:
Military part number and general information are as shown in table I.
TABLE I. Military part number and general information.
Military
Symbol
Supersedes 1/
part no.
no.
Type
M15743/17-001
2638.1
S2JRM3A-2
1/ From NAVSEA Drawing 803-74055.
ORDERING DATA:
Acquisition documents should specify the following:
(a) Switch action marking, if other than shown, (see requirements).
(b) Switch function marking required (identification plate item no.), (see table III).
(c) Wiring diagram for identification plate item numbers 19 through 36 (see table III).
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business