MIL-DTL-12285F
STANDARDS
-
Identification Marking of US Military Property.
-
Electronic and Electrical Component Parts.
-
Dissimilar Metals.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
-
Materials to Fungi, Synthetic Polymeric, Determining Resistance of
(Copies of these documents are available online at www.astm.org/ or from American Society for Testing
and Materials, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania, 19428-2959.)
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
-
Quality Assurance Requirements for Measuring Equipment - Part 1;
Metrological Confirmation System for Measuring Equipment.
(Application for copies can be found online at https://www.ansi.org or should be addressed to the
American National Standards Institute (ANSI), 25 West 43rd Street, New York, NY 10036-8002,
telephone 212-642-4900, fax 212-302-1286).
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)
-
Calibration of Measuring and Test Equipment, Requirements for
(Application for copies can be found online at https://www.ansi.org/ or 25 West 43rd Street, New York,
NY 10036-8002, telephone 212-642-4900, fax 212-302-1286)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheets. In the event of any conflict between requirements of
this specification and the specification sheets, the latter shall govern.
3.2 Qualification. Switches furnished under this specification shall be products which are authorized
by the qualifying activity for listing on the applicable qualified products list at the time of award of contract
3.3 Materials. Materials shall be as specified herein and in referenced specifications, standards and
drawings. Specifications and standards for all materials, parts, and processes which are not specifically
designated herein and which are necessary for the execution of this specification shall be selected to
meet the performance requirements of this specification. (see 4.7.1).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business