MS35059 Switch, Toggle, Two Pole, Sealed Toggle

Pages 1 - 2 - 3 - 4

MS35059K

NOTES:

1.   For hardware and terminals screw detail specifications see supplement of MIL-DTL-83731.

2.   All dimensions are in inches.

3.   Unless otherwise specified, Tolerance is ± .02 on two place decimals and ± .005 on three place decimals.

4.   For design feature purposes, this standard takes precedence over procurement document referenced herein.

REQUIREMENTS:

All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever.

Maximum weight is 0.10 lbs. Electrical Endurance: 10,000 cycles.

Mechanical Endurance: 20,000 cycles.

MS part number: See table I.

Referenced documents shall be of the issue in effect on the date of invitation for bid. Electrical Rating: See table II.

Table I: MS part numbers

1/ These MS part numbers are superseded by MS part number MS35059-21 thru MS35059-31 inclusive as applicable. By removing the screws and lockwashers from applicable part, a switch with solder lug terminals is formed.

2