MS27788 Switch, Toggle, One Pole, Environmentally Sealed, Lever Lock, Integrated Wire Terminals

Pages 1 - 2 - 3 - 4 - 5

MS27788D

TABLE I: Detail Requirements

MS Part Number	Available Locking Combinati ons	Circuit with toggle lever in			Current capacity (amperes) 28 volts dc			Current capacity (amperes) 115 volts, 60 and 400 hertz ac
MS Part Number	Available Locking Combinati ons	Keying Side	Center	Opposite keying side	Lamp- load circuit	Resistiv e circuit	Inductive circuit	Lamp- load circuit	Resistive circuit	Inductive circuit
MS27788-1	ALL	1-2 ON 4-5	1-2 ON 5-6	2-3 ON 5-6	7	7.5	7.5	4	7.5	7.5
MS27788-2	E,F,K,L,M, N	MOM. 1-2 ON 4-5	1-2 ON 5-6	2-3 ON 5-6	5	7.5	7.5	2	7.5	7.5
MS27788-3	E,L,N	MOM. 1-2 ON 4-5	1-2 ON 5-6	MOM. 2-3 ON 5-6	5	7.5	7.5	2	7.5	7.5
MS27788-21	All	1-2 ON	OFF	2-3 ON 5-6	7	7.5	7.5	4	7.5	7.5
MS27788-22	D,F,G	OFF	NONE	2-3 ON 5-6
MS27788-23	D,F,G	1-2 ON 4-5	NONE	2-3 ON 5-6
MS27788-24	E,F,K,M	NONE	OFF	2-3 ON 5-6
MS27788-25	F	NONE	MOM. OFF	2-3 ON 5-6	5	7.5	7.5	2	7.5	7.5
MS27788-26	F	MOM. 1-2 ON 4-5	NONE	2-3 ON 5-6
MS27788-27	E,L,N	MOM. 1-2 ON 4-5	OFF	MOM. 2-3 ON 5-6
MS27788-28	E	MOM. 1-2 ON 4-5	OFF	NONE
MS27788-29	F	MOM. OFF	NONE	2-3 ON 5-6
MS27788-30	F	MOM. 1-2 ON 4-5	NONE	OFF
MS27788-31	E,F,K,L,M, N	MOM. 1-2 ON 4-5	OFF	2-3 ON 5-6
MS27788-32	E	NONE	1-2 ON 4-5	MOM. 2-3 ON 5-6
MS27788-33	E,F,K,M	NONE	1-2 ON 4-5	2-3 ON 5-6	7	7.5	7.5	4	7.5	7.5

Test Requirements

Test shall be performed in accordance with MIL-DTL-3950 except

a) During all tests. Switches shall be fully wired with appropriate wire and terminal contacts.

b) Contact voltage drop- the contact drop with two terminals and the switch contact in series shall not exceed 8 millivolts measured from one wire contact through the contacts to the other wire contacts.