MS27788D
REQUIREMENTS
The Sealing grommet shall seal on a smooth wire insulation of .040 (1.02 mm) to .083 (2.11mm)
diameters
The terminal end of switch shall be color coded red to indicate contact size
Direction of internal mechanism movement is opposite to the direction of the toggle movement
Sealing plugs may be used in nonfunctional grommet holes. Maximum weight is .137 pound.
Locking arrangement Positive locking shall be accomplished and shall prevent motion of the toggle lever until the locking mechanism is manually released.
The force required to release the locking mechanism shall be 3 to 5 pounds.
The locking means at the top of the toggle busing shall be capable of withstanding a torque of 20 inch- pounds applied in both directions immediately following the humidity test.
Electrical rating: See table I.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business