MS27781D
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.432 |
10.97 |
.008 |
0.20 |
.469 |
11.91 |
.012 |
0.30 |
.47 |
11.9 |
.020 |
0.51 |
.635 |
16.13 |
.060 |
1.52 |
1.05 |
26.7 |
.076 |
1.93 |
1.140 |
28.96 |
.38 |
9.7 |
1.270 |
32.26 |
.42 |
10.7 |
1.662 |
42.21 |
NOTES:
1. Dimensions are inches. Metric equivalents are given for general information only.
2. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
3. For hardware detail specifications see appendix of MIL-DTL-3950.
4. Contact installing/ removal tool in accordance with MIL-I-81969/14-03.
5. Grommet sealing plug, in accordance with MS27488A16.
6. Terminal shall adequately accept a wire contact within dimensional limits of SAE-AS39029/1-102.
7. Direction of internal mechanism movement is opposite to the direction of the toggle movement.
FIGURE1. Dimensions and configuration Continued
REQUIREMENTS
Maximum weight is .108 pound.
The force required to release the locking mechanism shall be 3 to 5 pounds.
Locking arrangement: Positive locking shall be accomplished and shall prevent motion of the toggle movement
The locking means at the top of the toggle bushing shall be capable of withstanding a torque of 20 inch- pounds applied in both directions immediately following the humidity test.
The sealing grommet shall seal on a smooth wire insulation of .068 (1.73 mm) to .103 (2.62 mm)
diameters.
The terminal end of switch shall be color coded blue to indicate contact size. Sealing plugs may be used in nonfunctional grommet holes.
Electrical rating: See table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business