MS27719H
REQUIREMENTS:
Design and construction: See figure 1.
Terminals shall accommodate no. 18 awg wire.
Switching characteristics: see table I. Direction of the movement of the switch mechanism is opposite to that of the toggle lever.
Maximum weight is .5 ounce.
Dielectric withstanding voltage: Test voltage for dielectric withstanding voltage at reduced barometric pressure, shall be 400 V rms minimum.
Toggle seal test: Applicable
Electrical endurance: 30,000 cycles. Electrical rating:
28 V dc and 115 V ac 400Hz:
Resistive loads: 5 amperes. Inductive loads: 2 amperes. Lamp Loads: 1 ampere.
Intermediate current; 30,000 cycles
Mechanical endurance: 50,000 cycles at -65°C then 50,000 cycles at 85°C
Part or Identifying Number (PIN): Example: MS27719- 21- 1
Dash number (see table I)
PIN MS27719-21-1 identifies a switch with a circuit configuration of ON in the down position (keying side), OFF in center position, and, ON in the UP position (opposite the keying side)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business