INCH-POUND MS27719H
3 March 2011
SUPERSEDING MS27719G
16 November 2005
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, MINIATURE DOUBLE POLE, TOGGLE SEAL
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and
the latest issue of MIL-DTL-83731.
.51 DIA SHOULDER OPT
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.030 |
0.76 |
.072 |
1.83 |
.27 |
6.9 |
.535 |
13.59 |
.04 |
1.02 |
.10 |
2.5 |
.468 |
11.89 |
.575 |
14.61 |
.062 |
1.57 |
.175 |
4.45 |
.47 |
11.9 |
.690 |
16.26 |
.07 |
1.78 |
.240 |
6.10 |
.51 |
13.0 |
.740 |
18.80 |
NOTES:
1. Metric equivalents are given for information only.
2. Dimensions are in inches.
3. Unless otherwise specified, tolerances are ± .020 (0.51 mm) on two place decimals and ± .005 (0.13 mm) on three place decimals.
4. For hardware detail specifications see appendix of MIL-DTL-83731.
5. Configuration of switch case is optional provided maximum dimensions specified are not exceeded.
FIGURE 1. Dimensions and configurations
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business