MS27152C
REQUIREMENT
Switch contacts shall close at 60 ± 6 PSI and remain closed on decreasing pressure.
Switch contact rating at 24 Volts DC: resistance load 5 Amp. or lamp load 3 Amp, or inductive load 3
Amp. (L/R ratio .026).
Type I (low pressure closes contacts) Grade A (waterproof) class 2 (low vibration) of procurement specification.
With switch conducting rated resistive load current, the terminal to terminal voltage drop shall not exceed 150 millivolts prior to the endurance test of the procurement specification and shall not exceed
300 millivolts after endurance test.
Referenced documents
MIL-DTL-12211
MIL-STD-130
MS33800
FED-STD-H28
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity
Army - AT DLA - CC Air Force - 85
DLA - CC (Project 5930-2011-032)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/ .
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business