INCH-POUND MS27152C
10 March 2011
SUPERSEDING MS27152B
13 June 1968
DETAIL SPECIFICATION SHEET
Inactive for new design after 9 June 2005
SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and
the latest issue of MIL-DTL-12211.
NOTES:
1. Dimensions are in inches.
2. Tolerances are ± 1/64 on fractions.
3. Threads shall be in accordance with screw FED-STD-H28.
4. For design feature purposes, this standard takes precedence over procurement documents reference herein.
5. This standard is not intended to limit construction to features other than as shown hereon by dimensions, notations or referenced documents.
6. Marking shall consist of the MS part number and manufacturer's identification in accordance with
MIL-STD-130.
FIGURE1. Dimensions and Configuration.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business