MS21351G
TABLE I. Detail requirements.
MS dash no 1/ |
Circuit made between terminals as indicated with the toggle lever in these positions: 2/ |
Current capacity in amperes |
Life low current level switching 5 mV |
|||||||
Resistive load |
Inductive load |
|||||||||
28 volts dc |
115 volts |
28 volts dc |
115 volts |
|||||||
Opposite keyway side |
Center position |
Keyway side |
60 Hertz ac |
400 Hertz ac |
60 Hertz ac |
400 Hertz ac |
||||
-321 |
None |
2-3 on |
1-2 mom-on |
5 |
2 |
3 |
1 3/ |
1 |
2 |
25 µA 4/ |
1/ Delayed action of the switch toggle lever may cause circuit to close or open before snap action mechanism trips.
2/ Direction of movement of internal mechanism is opposite to the direction of the toggle movement.
3/ With time constant of .020 ±.002 second.
4/ Contact resistance not to exceed 50 during life, low current level switching.
Referenced documents: MI-DTL-8834
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity: Army - CR DLA - CC
Navy - AS
Air Force - 85 (Project 5930-2011-075) DLA - CC
Review activities: Army - AR, MI Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/ .
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business