MS14003J
REQUIREMENTS:
For hardware detail specifications' see appendix of MIL-DTL-8834.
In the event of a conflict between the text of this specification and the references cited herein' the text of this specification shall take precedence.
For design feature purposes' this specification takes precedence over acquisition documents referenced herein.
. Configuration of switch case housing' terminals' and barrier: design optional providing maximum dimensions specified are not exceeded.
Weight: .175 pound maximum (79.4 grams). Altitude requirements: 80'000 feet.
115 V ac 60 hertz electrical endurance tests are to be performed at room temperature and pressure.
. Contact bounce: Shall not exceed 3.5 milliseconds.
TABLE I. Detail requirements.
MS dash no |
Circuits made between terminals as indicated with the toggle lever in these positions: |
Current capacity amperes per pole 28 volts dc 1/ |
Current capacity amperes per pole 1/ 115 volts 400 hertz ac |
Current capacity amperes per pole 1/ 115 volts 60 hertz ac |
||||||||
Opposite keyway side |
Center position |
Keyway side |
Lamp load circuit |
Resis- tive circuit |
Induct- ive circuit |
Lamp load circuit |
Resis- tive circuit |
Induct- ive circuit |
Lamp load circuit |
Resis- tive circuit |
Induct- ive circuit |
|
-212 |
on 2-3' 5-6 8-9' 11-12 |
off |
on 1-2' 4-5 7-8' 10-11 |
7 |
25 |
15 |
7 |
25 |
15 |
7 |
20 |
15 |
-222 |
none |
off |
||||||||||
-232 |
on 1-2' 4-5 7-8' 10-11 |
|||||||||||
-242 |
off |
none |
||||||||||
-262 |
none |
mom-on 1-2' 4-5 7-9' 10-11 |
||||||||||
-272 |
mom-on 2-3' 5-6 8-9' 11-12 |
off |
||||||||||
-282 |
none |
|||||||||||
-292 |
on 2-3' 5-6 8-9' 11-12 |
none |
mom-off |
|||||||||
-302 |
off |
mom-on 1-2' 4-5 7-8' 10-11 |
||||||||||
-312 |
on 2-3' 5-6 8-9' 11-12 |
off |
||||||||||
See footnote at end of table.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business