MIL-PRF-8805/47G
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Enclosure design: 5 (Hermetic).
Temperature characteristic: 1 (-55°C to +85°C).
Shock type: M (100 g's).
Vibration grade: 1 (10 to 500 Hz).
Operating characteristics: See table I.
Part or Identifying Number (PIN): See table I.
Short circuit: 700 amperes.
Strength of actuating means: 25 pounds.
Terminal strength: 30 pounds.
Contact resistance: Not applicable.
Dielectric withstanding voltage:
Sea level: 1,000 V rms initial. 200 V rms after electrical endurance (Application of test potential
between unconnected terminals of the same pole is not required.).
Seal tests: Only watertight test shall be performed in group A of table VII and in group I of table VI.
Mechanical endurance: 25,000 cycles at .010 inch minimum overtravel.
Electrical endurance: 10,000 cycles.
Temperature rise: 65°C.
Electrical ratings: See table II.
Qualification inspection:
Group submission: See table III.
Quality assurance:
Group B: Explosion test not applicable.
Group B: Not applicable to inactive part numbers.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business