MIL-PRF-8805/4P
Contact resistance:
MS24547-3: 0.5 ohm maximum measured at 0.1 ampere, 28 V dc within .0005 inch of operating
points.
Mechanical endurance:
MS24547-1, MS24547-2, and MS24547-4 through MS24547-9: 50,000 cycles, at .004 (+.001 -
.000) inch overtravel.
MS24547-3: 100,000 cycles at .004 (+.001, - .000) inch overtravel.
MS24547-10 through MS24547-12: 100,000 cycles, at full overtravel.
Electrical endurance (power circuits): 25,000 cycles.
Contact bounce:
MS24547-1, -2, and 4 through 12: Not applicable.
MS24547-3: 5 milliseconds maximum.
Electrical rating: See tables I , I I , and I I I .
Intermediate current:
MS24547-1, MS24547-2, and MS245474 through MS2454712: Not applicable.
MS24547-3: 100,000 cycles at .004 (+.001, -.000) Inch overtravel.
Low level circuit:
MS24547-1 through MS24547-5, and MS24547-8: Not applicable.
MS24547-6, MS24547-7, and MS24547-9: 25,000 cycles.
MS24547-10 through MS24547-12: 50,000 cycles.
Logic level circuit:
MS24547-1 through MS24547-5, and MS24547-8: Not applicable.
MS24547-6, MS24547-7, and MS24547-9 through MS24547-12: Applicable.
Qualification inspection: See table IV.
Part or identifying number (PIN): See table V. MS24547 has been cancelled and replaced by
MIL-PRF-8805/4. The MS24547 military part identification numbers have been retained.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business