MIL-PRF-8805/106B
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerances are ± .010 (0.25 mm's).
3. Mounting holes will accept pins or screws of .087 maximum diameter on .188 ± .002 centers.
4. Metric equivalents (to the nearest .01 mm) are given for general information.
FIGURE 1. Configuration and dimensions - Continued
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Enclosure design: 1 (unsealed).
Temperature characteristics: 1 (- 55° C to + 205° C).
Shock type: 100 g, in accordance with method 213, MIL-STD-202, test condition C.
Vibration grade: 2 (10-2,000 cps)
Weight: .003 pounds maximum.
Operating characteristics: 20 percent variation from specified values are acceptable after endurance
test.
Actuating force: 5 ounces maximum.
Release force: 1 ounce minimum.
Pretravel: .020 inch maximum.
Overtravel: .004 inch minimum.
Movement differential: .002 inch maximum.
Terminals: Terminal finish may be .000050 inch maximum gold plate.
Dielectric withstanding voltage:
1,000 V rms at sea level.
400 V rms at 50,000 feet.
In the qualification inspection table after electrical endurance, the dielectric withstanding voltage
points of application between all unconnected terminals of the same pole is not applicable. (See table
II)
Mechanical endurance: 100,000 cycles.
Electrical endurance: 100,000 cycles.
Minimum current: Not applicable.
Low level circuit (M8805/106-02 only): 100,000 cycles.
Electrical ratings: See table I.
Part or Identifying Number (PIN): See table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business