MIL-PRF-8805/1E
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Enclosure design: 1 (unsealed).
Temperature characteristic: 1 (-55°C to +85°C).
Shock type: M (100 g), (contacts not monitored during test).
Vibration grade: 1 (10 to 500 Hz) (momentary transfer of contacts permitted in free position; no contact
transfer, in excess of 10 microseconds, permitted in actuated position).
Weight: .1 pound maximum.
Operating characteristics: See table 1.
Strength of actuating means:
Type A and B:
10 pounds.
Type C:
25 pounds.
Type D, E, F, and G:
8 ounces
Terminal strength: (solder terminals): 5 pounds.
Explosion: Not applicable.
Contact resistance: Not applicable.
Acceleration: 50g (except type E and type G shall be 20g).
Moisture resistance: Minimum insulation resistance, wet condition, 1 megohm.
Dielectric withstanding voltage:
Sea level: 600 V rms between all terminals and ground.
Altitude: 300 V rms at 50,000 ft.
(In qualification inspection table after electrical endurance the dielectric withstanding voltage points of
application between all unconnected terminals of the same pole is not applicable).
Mechanical endurance: See table II.
Electrical ratings: See table II.
Current ratings: Application information (see table IV and V).
Qualification:
Group submission: See table III.
Part or Identifying Number (PIN): See table VI.
4