MIL-PRF-24236/24E
TABLE V. Extent of qualification.
Configuration
Number of samples required
Tests
Qualifies
Complete in accordance
All in accordance with
with qualification inspection
A1
qualification table of
MIL-PRF-24236
of MIL-PRF-24236
All
A, A2, B, B1, B2
Two each
Visual and mechanical
Visual and mechanical,
A3
Two each
torque, vibration, and
shock
TABLE VI. Available differential range and recommended tolerance.
Available differential
Available
Operating temperature
range
tolerance
range
(°F)
Min
Max
Low
High
(°F)
(°F)
(°F)
(°F)
±8
±10
-65 to -1
25
200
±6
±8
0 to 300
15
200
±8
±10
301 to 350
15
200
±12
±12
351 to 400
25
200
NOTE: Tolerances not listed in table VI shall be coordinated with manufacturers listed on the QPL for this
specification sheet before specifying a particular "M" number. The fact that tolerances can be coded does
not necessarily mean that it can be manufactured or acquired.
Referenced Documents:
MIL-PRF-24236
The margins of this specification are marked with vertical lines to indicate where modifications from this amendment
were made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
(Project 5930-2006-031)
DLA - CC
Review activities:
Army - AR, AT, AV, CR4, MI
Navy - MC, OS
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil/ .
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business