MIL-PRF-24236/13J
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
High temperature setting: -30°F to +365°F (see tables II and III).
High temperature setting tolerance: ±8°F.
Low temperature setting (differential): 30°F ±8°F below applicable high temperature setting.
Class: 4, except vibration 10 to 2,000 Hz, 30 G.
Notes:
1. Devices with open on temperature rise should not be subjected to vibration while at temperatures of
75°F or more below the opening temperature.
2. Devices with close on temperature rise should not be subjected to vibration while at temperatures of
75°F or more above the opening temperature.
Mounting: See figure 1.
Weight: 0.3 gram maximum.
Dielectric withstanding voltage:
Sea level - 500 V ac for 5 seconds or 400 V ac for 1 minute.
70,000 feet - 250 V ac.
Electrical ratings:
1.0 ampere resistive at 115 V ac, 60 Hz.
1.0 ampere resistive at 28 V dc.
10 milliamperes resistive at 30 millivolts dc or 30 millivolts peak ac (when specified, see PIN information).
Endurance: 10,000 cycles.
Salt spray (corrosion): In accordance with MIL-PRF-24236, except switches shall be subjected to and pass the
seal test after undergoing salt spray. NOTE: Destructive corrosion shall be construed as any type of corrosion
which in any way interferes with the mechanical or electrical performance of the switch, or corrosion which
causes seal failure.
Marking: Identification marking shall be placed on the unit package label or tag.
Low level: When specified, see PIN information.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business