MIL-PRF-22885/75E
TABLE IV. Qualification inspection - group submission.
1/ Maintained depressed action.
TABLE II. Illuminated chromaticity limits. 1/
Inspection 1/
Sample
All samples
Group I
M22885/75-201R (4 samples)
Group II
M22885/75-025W (2 samples)
Group III
M22885/75-025W (2 samples)
Group VI 2/
M22885/75-201R (2 samples)
Group VII
Group VIII
2 pushbuttons of each color
(10 samples), of lens configuration 0, and without
EMI/RFI shielding. 3/
1/ Inspection groups in accordance with qualification inspection table of MIL-PRF-22885.
2/ Electrical endurance: Test resistance load, ac, only. Lamps used during electrical endurance
test shall be M6363/8-7.
3/ Pushbuttons shall be assembled to any representative switch body.
Part numbers: Part numbers are assigned as illustrated below. Part numbers do not include legend
description. Acquire switches with legends as category II items in accordance with MIL-PRF-22885.
RG
M22885/75 - 018
Dash number
Color codes (from table III)
Specification
from table V
for each lens segment,
sheet number
as required. Color code
sequence is same as lens
segment sequence shown on
figure 2 below 1/
Example -
3PDT momentary action
Segment number 2 is
switch with lens configuration
red. Segment number 3
1 horizontal split), no EMI/RFI
is green.
shielding, retained pushbutton.
6