MIL-DTL-9395/31E
Pulsation amplitude: E (10 percent).
Pulsation frequency: D (500 ±50 Hz).
Pressure rise: F (500,000 lbf/in2/s).
Dielectric withstanding voltage (at reduced barometric pressure): Applicable.
Connector torque: Applicable.
Part or Identifying Number (PIN): Consists of the prefix "M9395/31-" followed by a five-character
code. The code identifies the configuration, seal, and pressure setting mode (code from table I);
high-pressure setting to within 100 lbf/in2 (code from table II) followed by high-pressure setting to
within 25 lbf/in2 and applicable tolerance (code from table III); and low-pressure setting to within 100
lbf/in2 (code from table II) followed by low-pressure to within 25 lbf/in2 and applicable tolerance (code
from table III). When a pressure differential is used for one of the actuation values, two codes from
table IV are selected to define the differential spread.
EXAMPLE:
M9395/31-
V
DB
FH
Prefix.
Configuration, seal, and pressure setting mode
Code "V" of table I.
High-pressure setting. Code "D" of table II (400 lbf/in2)
and Code "B" of table III (+25, ±25 lbf/in2).
Low-pressure setting differential. Code "F" of table IV
(125 lbf/in2) and Code "H" of table IV (+175 lbf/in2).
PIN M9395/31-VDBFH describes a switch of configuration "4" which actuates on increasing pressure at
400 ±25 lbf/in2 and with a deadband value of 125 to 175 lbf/in2.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business