MIL-DTL-5423/15H
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.015 0.38
.087 2.21
.210 5.33
.362
9.19
.652 16.56
1.625 41.28
.025 0.64
.093 2.36
.219 5.56
.375
9.53
.688 17.48
1.765 44.83
.031 0.79
.109 2.77
.271 6.88
.406 10.31
.700 17.78
1.833 46.56
.040 1.02
.117 2.97
.312 7.92
.420 10.67
.719 18.26
1.953 49.61
.045 1.14
.125 3.18
.313 7.95
.449 11.40
.809 20.55
2.148 54.56
.046 1.17
.140 3.56
.340 8.64
.473 12.01
.810 20.57
2.419 61.44
.047 1.19
.141 3.58
.343 8.71
.500 12.70
.813 20.65
2.594 65.89
.050 1.27
.175 4.45
.344 8.74
.562 14.27
1.250 31.75
2.828 71.83
.062 1.57
.203 5.16
.350 8.89
.612 15.54
1.443 36.65
3.118 79.20
.070 1.78
.205 5.21
.359 9.12
.625 15.88
1.500 38.10
3.380 85.85
.078 1.98
3.661 92.99
NOTES:
1. Dimensions are in inches. Metric equivalents are given for general information only.
2. Unless otherwise specified, tolerances are .015 (0.38 mm).
3. All corner and fillet radii to be .016 (0.41 mm) unless otherwise specified.
4. Flash at parting line must not extend out more than .005 (0.13 mm) or exceed .020 (0.51 mm) in thickness
FIGURE 1. Dimensions and configuration Continued.
4