MIL-DTL-5423/1F
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Silicon rubber: Grade 50.
Restoring force (style 1): 5 inchounces.
Watertightness: Inner constriction test required.
Endurance:
Style 1: In accordance with MIL-DTL-5423.
Style 1S: 15,000 cycles of mechanical operations.
Part or Identifying Number (PIN):
Style 1: M5423/01-01.
Style 1S: M5423/01-02.
NOTE: Style 1S Toggle switches selected for use with these boots should have adequate operating force to avoid
any tendency of the boot to return to a position other than that in which it is set.
Qualification: First Article Testing in accordance with MIL-DTL-5423.
The margins of this specification are marked with vertical lines to indicate where modifications were made. This was
done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these
notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire
content irrespective of the marginal notations.
Referenced documents:
MIL-DTL-5423
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - AS
Air Force - 85
(Project 5930-2008-058)
DLA - CC
Review activities:
Army AT, AV, CR4, MI
Navy CG, EC, MC, OS
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business