MIL-DTL-21604/2C
TABLE I. Type designation and switching characteristics.
Type designation
Dimension
Maximum
Approximate
"X" 2/
rotational
Number of
Style
weight
Rotor
.062 inch
torque
sections
Component
(ounces)
designation 1/
(inch-pounds)
(1.57 mm)
S
3
JK
3
3.09 ( 78.49)
22
15
S
3
JK
5
3.81 ( 96.82)
28
20
S
3
JK
10
6.34 (161.14)
47
35
S
3
JK
15
8.50 (215.90)
56
40
1/ For rotor designation, see figure 2.
2/ Dimensions are in inches. Metric equivalents (to the nearest 0.01 mm) are given for general
information only and are based upon 1 inch = 25.4 mm.
TABLE II. Qualification test samples.
Sample switch
Test number 1/
Sample switch
Test number
S3JK15
1
S3JK15
3
S3JK15
2
S3JK15
4
S3JK15
5
S3JK15
6
1/ Test numbers in accordance with table II of MIL-DTL-21604.
The margins of this specification are marked with vertical lines to indicate where modifications from this amendment
were made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations.
Reference Documents:
MIL-DTL-21604
Custodians:
Preparing activity:
Navy - SH
DLA - CC
DLA - CC
(Project 5930-2009-006)
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil/ .
6