MIL-DTL-15291 Switches, Rotary, Snap Action And Detent/Spring Return Action, General Specification ForThis specification covers snap-action and detent and spring action rotary switches for use in alternating and direct current applications, with ratings as specified \(see 3.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-DTL-15291G

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

Calibration of Measuring and Test Equipment, Requirements for

(Copies of these documents are available online at https://www.ansi.org or from the American National

Standards Institute (ANSI), 125 West 43rd Street, New York, NY 10036-8002, telephone 212-642-4900.)

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

Standard Specification for Zinc On Iron and Steel, Electrodeposited Coatings of

(Copies of these documents are available online at https://www.astm.org or from the American Society

for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania, 19428-2959.)

INTERNATIONAL ORGANIZATION FOR STANDARDS (IS0)

Measurement Management Systems - Requirements for Measurement Processes

and Measuring Equipment

(Copies of these documents are available online at https://www.ansi.org or from the American National

Standards Institute (ANSI), 125 West 43rd Street, New York, NY 10036-8002, telephone 212-642-4900.)

SOCIETY OF AUTOMOTIVE ENGINEERS

Nickel Plating (Electrodeposited)

(Copies of these documents are available online at https://www.sae.org or from Society of Automotive

Engineers, 400 Commonwealth Drive, Warrendale, Pennsylvania, 15096-0001)

2.4 Order of precedence. In the event of a conflict between the text of this document and the

references cited herein (except for related specification sheets), the text of this document takes

precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Specification sheets. The individual item requirements shall be as specified herein and in

accordance with the applicable specification sheet. In the event of any conflict between the requirements

of this specification and the specification sheet, the latter shall govern.

3.2 Qualification. Switches furnished under this specification shall be products which are authorized by

the qualifying activity for listing on the applicable qualified products list at the time of award of contract

(see 4.4 and 6.6).