INCH POUND
MIL-DTL-13625F
9 December 2009
SUPERSEDING
MIL-DTL-13625E
27 March 2003
DETAIL SPECIFICATION
SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING,HEADLIGHT:
ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers 28-volt (V) direct-current (dc) maximum, push, pull, and headlight
beam-selecting switches (see 6.1).
1.2 Classification. Switches should be of the following types, arrangements, classes, and grades, in
1.2.1 Types.
Type I
Push; single-pole, single-throw, momentary operation, light duty.
Type II
Beam selecting, headlight; single-pole, double-throw.
Type III
Beam selecting, headlight; multi-pole, double-throw.
Type IV
Push; single-pole, single-throw, momentary operation, heavy duty.
Type V
Pull; single-pole, single-throw, pull-latch disconnect.
1.2.2 Arrangements.
Arrangement 1: Normally open.
Arrangement 2: Normally closed.
Arrangement 3: No open.
1.2.3 Classes.
Class A: Slow make and break.
Class B: Fast make and break.
1.2.4 Grades.
Grade 1: Watertight (operable during immersion).
Grade 2: Open (waterproof, but not operable during immersion).
Comments, suggestions or questions on this document should be addressed to Defense Supply Center
Columbus, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to switch@dla.mil.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business