MIL-DTL-12211G
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
-
Laboratories, Calibration, and Measuring and Test Equipment.
INTERNATIONAL ORGANIZATION for STANDARDS (ISO)
-
Equipment, Quality Assurance Requirements for Measuring - Part 1:
Meteorological Confirmation System for Measuring Equipment.
(Applications for copies can be obtained online at www.ansi.org or through the American National
Standards Institute, 11 West 42nd Street New York, NY 10036).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
-
Salt spray (Fog) Apparatus, Operating.
(Application for copies can be obtained online at www.astm.org or through the American Society for
Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428-2959.)
(Non-Government standards and other publications are normally available from the organizations that
prepare or distribute the documents. These documents also may be available in or through libraries or
other informational services.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The switches furnished under this specification shall be products which are
authorized by the qualifying activity for listing on the applicable qualified products list at the time of award
3.2 Materials. Materials shall be as specified herein and in referenced specifications, standards and
drawings. Material shall be free of defects that adversely affect performance or serviceability of the
finished product (see 4.7.1).
3.2.1 Dissimilar metals. Dissimilar metals shall be protected from galvanic corrosion in accordance
3.2.2 Pure tin. The use of pure tin, as an underplate or final finish, is prohibited both internally and
externally. Tin content of switch components and solder shall not exceed 97 percent, by mass. Tin shall
be alloyed with a minimum of 3 percent lead, by mass (see 6.5).
3.3 Interface and physical dimensions. Switches shall conform to MS27152, MS75062, MS75063 or
MS90530, Drawings 7321326 or 11669414; and to other applicable standards or drawings, as specified
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business