DETAIL SPECIFICATION SHEET Inactive for new design after 9 June 2005
INCH-POUND MS75062B
10 March 2011
SUPERSEDING MS75062A
26 June 1970
SWITCH, PRESSURE-STOPLIGHT, VEHICULAR, AIR BRAKE SYSTEM, 24 VOLT, WATERPROOF This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-12211.
1.140
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerances are ±1/32 on fractions.
3. For design feature purposes, this standard takes precedence over procurement document referenced herein.
4. This standard is not intended to limit construction to features other than as shown by dimensions, notations or referenced documents.
5. Alternate internal breather valve (ball check Type) may be used within the confines of the switch dimensions
FIGURE 1 Dimensions and Configuration.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business