MS75028K
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
0.003 |
0.08 |
0.021 |
0.53 |
0.047 |
1.19 |
0.080 |
2.00 |
0.220 |
5.59 |
0.375 |
9.53 |
0.005 |
0.13 |
0.030 |
0.76 |
0.050 |
1.27 |
0.085 |
2.00 |
0.250 |
6.35 |
0.410 |
10.40 |
0.006 |
0.15 |
0.031 |
0.79 |
0.055 |
1.40 |
0.180 |
4.60 |
0.255 |
6.48 |
0.470 |
11.90 |
0.020 |
0.51 |
0.042 |
1.07 |
0.062 |
1.57 |
0.203 |
5.16 |
0.275 |
6.99 |
0.525 |
13.40 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.020 on two place decimals and ±.005 on three place decimals.
4. For hardware detail specifications, see appendix of MIL-DTL-83731, and herein.
5. Terminal 3 is not supplied on SPST switch (MS75028-22).
FIGURE 1. Dimensions and configurations - Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1. Switching characteristics: See table I.
TABLE I. Switching characteristics.
MS Part or Identifying Number (PIN) |
Circuit with toggle lever in |
||
Down position (keying side) |
Center position |
Up position (opposite keying) |
|
MS75028-21 |
ON |
OFF |
ON |
MS75028-22 |
OFF |
NONE |
ON |
MS75028-23 |
ON |
NONE |
ON |
MS75028-26 |
MOM ON |
NONE |
ON |
MS75028-27 |
MOM ON |
OFF |
MOM ON |
MS75028-31 |
MOM ON |
OFF |
ON |
Switches, as specified herein, are designed so that the movement of the switch mechanism is opposite the toggle lever, with the exception if -22 and -23 in which the toggle movement is the same as the switch mechanism.
Weight: .015 pound max. Electrical ratings:
At 30.0 V dc:
Resistive load: 5.0 amperes. Inductive load: 2.0 amperes. Lamp load: 1.0 ampere.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business