MS53001B
Typical vehicular light wiring chart |
||
Terminal pin |
A |
BO low |
Terminal pin |
B |
Bo hi |
Terminal pin |
c |
Bo feed |
Terminal pin |
E |
Service low |
Terminal pin |
F |
Service hi |
Terminal pin |
G |
Service feed |
Terminal pin |
D |
Hi beam indicator |
Terminal pin |
H |
Hi beam indicator |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.06 .25 .29 .39 .62 |
1.5 6.4 7.4 9.9 15.7 |
.75 .875 1.065 1.082 1.62 |
19.1 22.23 27.05 27.48 41.15 |
1.625 2.060 3.030 4.125 4.250 |
41.28 52.32 76.96 104.78 107.95 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.015 (0.38 mm).
FIGURE 1. Dimensions and configurations - continued.
REQUIREMENTS:
Type III (multi-pole, double throw, no off) class B (fast make and break), grade 1 (enclosed, watertight) of acquisition specification.
15 amp resistive load, 10 amp inductive load, 8 amp lamp load.] Pressure required to operate the switch shall be 35 pounds maximum. Switch shall withstand a minimum pressure of 100 pounds without damage. Switch shall not exceed a maximum weight of 14 ounces.
For design feature purposes, this standard takes precedence over acquisition documents referenced herein.
This standard is not intended to limit construction to features other than as shown hereon by dimensions, notations, and referenced documents.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Marking shall consist of the MS part number and the manufacturer's identification in accordance with MIL-STD-130. In the event of a conflict between the text of this standard and the reference cited herein, the text of this standard
shall take precedence.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business