MS27783D
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.432 |
10.97 |
.008 |
0.20 |
.469 |
11.91 |
.012 |
0.30 |
.47 |
11.9 |
.020 |
0.51 |
1.05 |
26.7 |
.060 |
1.52 |
1.140 |
28.96 |
.076 |
1.93 |
1.340 |
34.04 |
.38 |
9.7 |
1.660 |
42.16 |
.42 |
10.7 |
1.706 |
43.33 |
NOTES:
1. Dimensions are inches. Metric equivalents are given for general information only.
2. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
3. For hardware detail specifications see appendix of MIL-DTL-3950.
4. Contact installing/ removal tool in accordance with MIL-I-81969/14-03.
5. Grommet sealing plug, in accordance with MS27488-A16.
6. Terminal shall adequately accept a wire contact within dimensional limits of SAE-AS39029/1-102.
7. Part number example: MS27783-21A (locking combination 'A').
8. In the event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
REQUIREMENTS
Sealing plugs may be used in nonfunctional grommet holes.
Sealing grommet shall seal on a smooth wore insulation of .06 (1.73 mm) to 1.03 (2.62 MM) diameters
The terminal end of switch shall be color coded blue to indicate contact size
Direction of internal mechanism movement is opposite to the direction of the toggle movement
Maximum weight is .227 pound.
The locking means at the top of the toggle bushing shall be capable of withstanding a torque of 20 inch- pounds applied in both directions immediately following the humidity test.
Locking arrangement Positive locking shall be accomplished and shall prevent motion of the toggle lever until the locking mechanism shall be 3 to 5 pounds
Direction of internal mechanism movement is opposite to the direction of the toggle movement. Electrical rating: See table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business