INCH-POUND MS27754F
13 April 2011
SUPERSEDING MS27754E
20 May 1988
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, MINIATURE, DOUBLE POLE TOGGLE SEAL, LEVER LOCK
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83731.
Inches |
mm |
Inches |
mm |
Inches |
mm |
.004 .030 .04 .062 .07 |
0.10 0.76 1.02 1.57 1.78 |
.072 .090 .10 .175 .27 .428 |
1.83 2.29 2.5 4.45 6.9 10.87 |
.47 .51 .535 .575 .740 1.160 |
11.9 13.0 13.59 14.61 18.80 29.46 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.020 (0.51 mm) on two place decimals and ±.005 (0.13 mm) on three place decimals.
3. For hardware detail specifications, see supplement of MIL-DTL-83731.
4. Configuration of switch case is optional provided maximum dimensions specified are not exceeded.
FIGURE 1. Dimensions and configurations.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business