MS27753G
REQUIREMENTS:
Test voltage for dielectric withstanding voltage at reduced barometric pressure, shall be 400 V rms minimum.
All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever.
Electric endurance shall be preformed for 30,000 cycles.
Mechanism endurance shall be performed 50,000 cycles at -65° C and then 50,000 cycles at 85°C.
Intermediate current shall be performed for 30,000 cycles.
Terminals shall be molded into the switch case and shall accommodate no. 18 awg wire. Electrical rating for 28 volts direct current and 115 volts alternating current shall be at 400 Hertz. Lamp load = 1 ampere, Resistive load = 5 amperes, Inductive load = 2 amperes.
Maximum weight shall be .015 lb.
In the event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence
Table II Detail Requirements
Canceled MS Part Number 1/ |
Substitute MS part Number 1/ |
Circuits Made with toggle lever In |
||
Keying Side 1-2 4-5 |
Center Position |
Opposite Keying Side 2-3 5-6 |
||
MS27753-1 |
MS27753-34 |
On |
2-3 On 4-5 |
On |
MS27753-2 |
MS27753 -35 |
Mom-On |
2-3 On 4-5 |
On |
MS27753-3 |
MS27753-36 |
Mom-On |
2-3 On 4-5 |
Mom-On |
MS27753-4 |
MS27753-38 |
On |
1-2 On 5-6 |
On |
MS27753-5 |
MS27753-39 |
Mom-On |
1-2 On 5-6 |
On |
MS27753-6 |
MS27753-40 |
Mom-On |
1-2 On 5-6 |
Mom-On |
1/ The canceled part number are no longer procurable; the substitute part numbers have a low dielectric withstanding voltage at reduced barometric pressure
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business