MS27752D
inches .003 |
mm .08 |
inches .248 |
mm 6.30 |
.005 |
.13 |
.469 |
11.91 |
.008 |
.20 |
.475 |
12.06 |
.016 |
.41 |
.688 |
17.47 |
.031 |
.79 |
.750 |
19.05 |
.032 |
.81 |
.840 |
21.34 |
.050 |
1.27 |
1.093 |
27.76 |
.062 |
1.57 |
1.344 |
34.14 |
.096 |
2.44 |
1.547 |
39.29 |
.188 |
4.77 |
2.188 |
55.57 |
.240 |
6.10 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specifies, tolerances are ± .016 on decimals.
3. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
4. Material: Plastic, molded, red color shade 11136, FED-STD-595. Steel, commercial, shall be smooth and free from burrs.
5. Finish: Zinc plate, ASTM-8633 , type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semi gloss, color number 27038, FED-STD-595 or equivalent.
6. Referenced documents shall be of the issue in effect on date of invitations for bid.
FIGURE 1.Dimensions and Configuration Continued
REQUIREMENTS
Guard shall remain in either open or closed position. Opening or closing of guard shall not change position of switch contacts.
Suitable for use with switches having toggle characteristics in accordance with detail A (1-hole mounting).
Referenced documents
MIL-DTL-7703
MIL-C-8514
ASTM-8633
SAE-AMS-QQ-P-416
FED-STD-595
DOD-P-15328
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business