MS27734E
Inches |
mm |
Inches |
mm |
.008 |
0.20 |
.25 |
6.4 |
.012 |
0.30 |
.38 |
9.7 |
.015 |
0.38 |
.432 |
10.97 |
.03 |
0.8 |
.469 |
11.91 |
.076 |
1.93 |
.47 |
11.9 |
.090 |
2.29 |
.69 |
17.5 |
.18 |
4.6 |
.635 |
16.13 |
.19 |
4.8 |
1.18 |
30.0 |
.240 |
6.10 |
1.270 |
32.26 |
NOTES:
1. Dimensions are inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950.
5. In the event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business