MS27723D
Inches |
mm |
Inches |
mm |
.008 |
0.20 |
.432 |
10.97 |
.012 |
0.30 |
.469 |
11.91 |
.03 |
0.8 |
.47 |
11.9 |
.076 |
1.93 |
.69 |
17.5 |
.240 |
6.10 |
.910 |
23.11 |
.38 |
9.65 |
1.340 |
34.04 |
1.706 |
43.33 |
NOTES:
1. Dimensions are inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
4. For hardware detail specifications, see appendix of MIL-DTL-3950.
5. Contact installing/removal tool in accordance with MIL-I-81969/14-03.
6. Grommet sealing plug, in accordance with MS27488-A16.
7. The sealing grommet shall seal on a smooth wire insulation of .068 (1.73 mm) to .103 (2.62 mm)
diameters.
8. Terminal shall adequately accept a wire contact within dimensional limits of SAE-AS39029/1-102.
9. In the event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business