INCH-POUND MS27721H
13 April 2011
SUPERSEDING MS27721G
20 May 1988
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, MINIATURE, DOUBLE POLE TOGGLE SEAL, LEVER LOCK
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83731.
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 .020 .030 .04 .062 .07 |
0.13 0.51 0.76 1.02 1.57 1.78 |
.072 .090 .10 .175 .27 .428 |
1.83 2.29 2.54 4.45 6.68 10.87 |
.47 .51 .535 .575 .740 1.160 |
11.94 12.95 13.59 14.61 18.80 29.46 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.020 (0.51 mm) on two place decimals and ±.005 (0.31 mm) on three place decimals.
3. For hardware detail specifications, see supplement of MIL-DTL-83731.
4. Configuration of switch case is optional provided maximum dimensions specified are not exceeded.
5. Metric equivalents are given for general information only.
FIGURE 1. Dimensions and configurations.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business