MS27717G
Inches |
mm |
Inches |
mm |
.030 |
0.76 |
.250 |
6.35 |
.04 |
1.02 |
.25 |
6.4 |
.055 |
1.40 |
.27 |
6.9 |
.060 |
1.52 |
.31 |
7.9 |
.07 |
1.78 |
.42 |
10.7 |
.10 |
2.5 |
.535 |
13.59 |
.110 |
2.79 |
.575 |
14.61 |
.175 |
4.45 |
.640 |
16.26 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) on two place decimals and ±.005 (0.13 mm) on three place decimals.
4. For hardware detail specification, see supplement of MIL-DTL-83731.
5. Configuration of switch case is optional provided maximum dimensions specified are not exceeded.
FIGURE 1 Dimensions and configurations
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business