MS27406E
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.37 |
9.4 |
.008 |
0.20 |
.38 |
9.7 |
.012 |
0.30 |
.432 |
10.97 |
.020 |
0.51 |
.47 |
11.9 |
.03 |
0.8 |
.69 |
17.5 |
.060 |
1.52 |
1.10 |
27.9 |
.076 |
1.93 |
1.340 |
34.04 |
.130 |
3.30 |
1.370 |
34.80 |
.240 |
6.10 |
1.660 |
42.16 |
.25 |
6.4 |
NOTES:
1. Dimensions are inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950.
5. In event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
REQUIREMENTS
All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever
Maximum weight is .20 pound. Electrical rating: See table I.
TABLE I Detail Requirements.
MS part number |
Circuit with toggle lever in |
Current capacity (amperes) 28 volts DC |
Current capacity (amperes) 115 volts, 60 and 400 hertz ac |
||||||
Keying side |
Center |
Opposite keying side |
Lamp-load circuit |
Resistive circuit |
Inductive circuit |
Lamp- load circuit |
Resistive circuit |
Inductive circuit |
|
|
MS27406-1 |
1-2 4-5 7-8 On 10-11 |
2-3 4-5 7-8 On 10-11 |
2-3 5-6 8-9 On 10-11 |
5 |
20 |
12 |
4 |
15 |
15 |
|
MS27406-2 |
1-2 Mom. 4-5 7-8 On 10-11 |
2-3 4-5 7-8 On 10-11 |
2-3 5-6 8-9 On 10-11 |
4 |
18 |
10 |
2 |
11 |
8 |
|
MS27406-3 |
1-2 Mom. 4-5 7-8 On 10-11 |
2-3 4-5 7-8 On 10-11 |
2-3 Mom. 5-6 8-9 On 10-11 |
||||||
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business