MS25452H
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.062 |
1.57 |
.161 |
4.09 |
.750 |
22.22 |
006 |
0.20 |
.081 |
2.06 |
.516 |
13.11 |
1.250 |
31.75 |
.010 |
0.25 |
.094 |
2.39 |
.594 |
15.09 |
1.750 |
44.45 |
.016 |
0.41 |
.151 |
3.83 |
.703 |
17.86 |
1.812 |
46.02 |
.032 |
0.81 |
.156 |
3.96 |
.719 |
18.29 |
2.125 |
53.98 |
.050 |
1.27 |
NOTES:
1. Unless otherwise specifies, tolerances are ± .016 on decimals.
2. Material: Steel, commercial, shall be smooth and free from burrs.
3. Finish: Zinc plate, ASTM-8633 , type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number
FED-STD-595 /37038 or semi gloss, color number FED-STD-595 /27038 or equivalent.
4. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
FIGURE 1.Dimensions and configuration Continued
REQUIREMENTS
Guard shall remain in only the closed position.
Opening the guard shall not change the position of the toggle lever.
Closing the guard with the lever in the up position locks lever in the up position. The guard in the closed position shall exert no pressure o the toggle.
Part or Identifying Number (PIN) MS25452-1 replaces and is completely interchangeable with PIN N3229-1.
Referenced documents
MIL-DTL-7703 |
MIL-C-8514 |
ASTM-8633 SAE-AMS-QQ-P-416 |
FED-STD-595/27038 |
FED-STD-595/37038 |
DOD-P-15328 |
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where modifications from this revision were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. 8idders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations.
Custodians: Preparing activity
Army - CR DLA - CC
Navy - AS (Project 5930-2011-026) Air Force - 11
DLA - CC
Review activities: Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/ .
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business